显示标签为“crusher”的博文。显示所有博文
显示标签为“crusher”的博文。显示所有博文

2010年12月6日星期一

symons nordberg Crusher and nordberg jaw crusher

7'0" Symons Nordberg Heavy Duty Short Head Cone Crusher

- Make – Symons-Nordberg
- Model – 7'0"
- Type – Heavy Duty Short Head Cone Crusher
- Condition – Good
- Unit Price – P.O.R
- Currency – US$
- Year – N/A
- Quantity – 1
- Unit – CR3003
- City – Kiruna
- State/Province – N/A
- Country – Sweden
- symons nordberg Crusher

- Part no. – N/A

Description - (1) 7' 0" Symons Nordberg heavy duty short head cone crusher S/N 730 with coarse bowl. Unit has hydraulic clamping, clearing and adjustment. It has been completely reconditioned and is complete with lubrication system and hydraulic power pack. Power is provided by a 220kw, 380/220v, 740 rpm drive motor.

Unique Nordberg crusher in China Jaw Crusher Application:

One of the most popular stone-crushing equipments in the world, PE series Fine Jaw Crusher is ideally suitable for primary and secondary crushing.
The highest anti-pressure strength of crushed material is 320Mpa. Our design and production are of high position both at home and abroad. One of our main products, Jaw Crusher is designed by our engineers with large reduction ratio, even granularity, simple structure, reliable operation, convenient maintenance, low cost, Jaw Crusher is widely used in mining, metallurgy, construction, highway, railroad, and chemistry industries. 

Jaw Crusher Operating Principle:


This jaw crusher uses motor as its power. Through the motor's wheels, the eccentric shaft is driven by the triangle belt and slot wheel to make the movable jaw plate move by a regulated track. Therefore, the materials in the crushing cavity composed of fixed jaw plate, movable jaw plate and side-lee board can be crushed and discharged through the discharging opening.

nigeria ore Mining Equipment,iron ore crusher in Nigeria

Introduction to Gold Mining

1.Rock is removed from the mine.Rock containing gold, is hauled to the Crushing Facility. Rock without gold is taken to the overburden storage areas.
2.Large haul trucks are used to move the rock from the Mine to the crushing Facility, or to the overburden storage areas.
3.Ore is processed at the two stage Crushing and Screening Facility,and hauled to the Valley Leach Facility.
4.The Valley Leath Facility is a lined, zero discharge area where dilute sodium cyanide process solution dissolves the gold, and is captured in the bottom of the lined area.
5.The gold is recovered from the process solution with a carbon adsorption process. The final product is a gold and silver button called Dore.
To separate the gold from the ore collected by the diggers in the mine tunnel, the ore was first crushed by a series of hammers in the stamper head. The crushed ore was then run over copper plates that had been treated with cyanide and then tinned with "quick-silver" (mercury). Mercury has a chemical affinity to gold and hence catches it. The resulting mixture was then heated to evaporate the mercury until only the gold remained. This method of extraction was used for many years although it was generally accepted that it was only 60% effective.

Gold Mining Applications

Gold is a precious metal mined to create practical and ornamental pieces of work. Refined gold ore can be melted, poured and cast into almost any shape to make jewelry. There are numerous industrial applications for gold, as well. Many electronics and medical devices rely on gold's ability to conduct electricity and resist corrosion. Here's how to identify gold ore.

Gold Ore is an international mining and exploration company with one operating gold mine and several gold and base metal exploration properties at various stages of development. The Bjorkdal Gold Mine and the company's exploration properties are all located in the safe, highly developed and mining friendly jurisdiction of Sweden. Bjorkdal, is currently producing gold from both underground and open-pit operations at an annualized rate approaching 40,000 oz/year. The company is currently focused on expanding the resource base at the mine through development drilling, while also searching for new deposits on highly prospective ground surrounding the minesite. The physical assets of the company are complemented by an experienced operations team at the Bjorkdal Mine and an experienced management team, located in Vancouver, Canada.

Gold mining mahcine

Gold mining machine has an important role in gold mining industry. SBM is a professional gold mining machine manufacturer of gold ore cursher ore gold mining crusher and gold mill machines. In gold mining, high technology gold mining equipment, such as gold detectors, elegant modern dredges, and lightweight sluices will be needed.

Gold crusher is also used as the primary crusher for crushing gold ore in gold ore crushing industry. Jaw crusher is the most used gold mining machine for crushing ore. Jaw crusher can reach the crushing ratio of 4-6 and the shape of final product is even. So gold jaw curshers are widely applied to crush high hardness, mid hardness and soft rocks and ores such as slags, construction materials, marble, etc.

Gold mobile crusher is the newly type of gold mining machine for gold crushing. Gold ore mobile crusher can eliminate the obstacles of the crushing places and circumstances, and offer the high efficient and low cost project plants for the client. To the client, gold mobile cursher is the best choice as a gold mining machine.

Nickel Ore Processing and Nickel Ore Crusher

Nickel is a silvery-white metal with a slight golden tinge that takes a high polish. It is one of only four elements that are magnetic at or near room temperature. Its Curie temperature is 355 °C. That is, nickel is non-magnetic above this temperature. Nickel belongs to the transition metals and is hard and ductile.

Nickel is extracted from Nickel ore. The nickel ore mining is a complex process which needs many equipment. The main processes include:

  • Crushing
  • Flotation
  • Pressure acid leach of nickel laterites
  • Pressure oxidation of sulphides
  • Roasting and smelting
  • Ferronickel production
  • Grinding
  • Solvent extraction separation
  • Mixed sulphide precipitation
  • Hydrogen reduction
  • Electro-refining

The most notably ore dressing method of sulfide copper-nickel mine is flotation, and magnetic separation and gravity separation is usually secondary beneficiation. In the flotation of sulfide copper-nickel ore, we often use collector and frother. There is a basic principle to determine the flotation process that is the fact that it’s better to make copper into the nickel concentrate while as much as possible to avoid nickel into the copper concentrate. Because the nickel in copper concentrate is of large loss in the smelting process, while the copper in nickel concentrate can be more completely recovered.

It is shown in the picture above with the sulfide copper-nickel ore beneficiation process. 

Nickel oxide ore currently used crushing and screening processes to pre-remove bulk rocks with weak degree of weathering and low nickel. As the nickel in the nickel oxide ore often scattered in gangue minerals in the form of isomorphism and their grain sizes are very fine, nickel oxide ore cannot be enriched by mechanical dressing methods. On the contrary, they must be only sent for direct smelting.

In the both beneficiation process of sulfide copper-nickel mine and nickel oxide ore, nickel ore crushing and grinding are required. Symons cone crusher is widely used for nickel ore crushing. There are standard cone crusher and short head cone crusher. Both them have been used as nickel ore crusher. After crushed by cone crusher, the materials must be grinded by rod mill and ball mill before being sent to flotation. Vibrating screen is used to separate different sizes of nickel ore. The screening equipment is also necessary for nickel ore crushing and grinding.

SBM is professional crushing equipment and grinding machine manufacturer. We have designed special Symons cone crusher for nickel ore crushing and ball mill for nickel ore grinding. Both the Symons cone crusher and ball mill are of high quality which has both passed international ISO9001:2000 certificate and UE, CE certificates. Apart from Symons cone crusher and ball mill, SBM crushing equipment also includes jaw crusher, impact crusher, VSI crusher and SBM grinding machine also includes coal mill, Raymond mill, vertical ore mill, trapezium grinding machine, coarse powder mill, etc.

Our goal is to provide our customers with best products and services. Our engineers spread around the global to be closer with you.

Molybdenum Ore Crusher and Molybdenum Ore Grinding Mill Machine

Molybdenum ore beneficiation flotation method is mainly recovered in the molybdenum mineral is molybdenite. Sometimes in order to improve the quality of molybdenum concentrates, to remove impurities, to further chemical processing molybdenum concentrate outside the grounds. Molybdenite crystal structure of hexagonal layered or plate by Fan and health along the layer S-Mo-S structure and the layer of polar covalent bond formation of S-Mo. Layers and weak bonding between layers, and layer covalent bonding even stronger. Therefore, the structure of molybdenite layer solution can easily split along the flaky or tabular output, which is the natural floatability chalcocite good reason.

Molybdenum Ore Crusher

Practice has proved that: at the right under the grinding fineness, the dissociation of molybdenite crystals occurs in S-Mo-S layer, the S-Mo surface hydrophilic small proportion. But after grinding time, S-Mo surface ratio of increase in the floatability of decline, although at this time adding a certain amount of polarity, such as xanthate collector class is beneficial to the recovery of molybdenite, but after grinding with the new sludge floatation effect. Therefore, the sorting of molybdenite to avoid and prevent excessive wear in the production and the need to adopt multi-stage grinding sub-sorting process, step by step to monomer dissociation, to ensure a high recovery of molybdenum concentrate.

Molybdenum mining and processing techniques have been improved continuously since the first mine was started at Climax near Leadville, Colorado in 1916.Today, the principal moly mines, both primary and by-product, are found along the Great Continental Divide of the Americas, in China and in the CIS. Many of these mines are amongst the most productive in the world, with the largest capable of moving over 50,000 tonnes of ore per day.
Mining and processing plants are operated with minimum emissions under stringent environmental protection regulations.

SBM is professional crushing equipment and grinding machine manufacturer. We have designed cone crusher for Molybdenum Ore Crusher, ball mill for nickel ore grinding, vibrating screen for sieving.

The ore is crushed to -5 inches in primary cone crushers, then reduced to -1/2" in short head cone crushers. The ore is then ground to -100 mesh in ball mills. Using wet magnetic separators the magnetic ore is separated and further reduced to -200 mesh in a ball mill.

Apart from cone crusher and ball mill, SBM crushing equipment also includes jaw crusher, impact crusher, VSI crusher and SBM grinding machine also includes Raymond mill, vertical mill, trapezium grinding machine, coarse powder mill, etc.

If you want to know more information about Molybdenum Ore Crusher, you can contact us.

mirror iron ore crusher

Iron ore is one of the most common minerals in the earth' crust. After the mirror iron ore crusher is mined and processed in an iron ore beneficiation plant, iron ore is made into different products for everyday life.
The major four usage of iron ore are:
1) Cast iron: it is ideal for moulded parts, like car engine blocks.
2) Wrought iron: it is suitable for use in outdoor furniture, porch railings and other decorations.
3) Steel: it is an excellent material for thousands of different uses.
4) Stainless steel: it is an ideal material for motor vehicle parts, hospital equipment and food preparation tools and utensils.
Iron ore is widely distributed in Chagai and Kalat area, Nizampur, Kalabagh/Mianwali in Pakistan.

Iron ore crushing plant plays an important role in mirror iron ore crusher mining and beneficiation. Zenith Iron ore crushing plant will equip with different crushing equipment from primary crusher, secondary crusher, tertiary crusher, washing equipment, sieving equipment and transferring equipment according to the site and the demands of the clients.
As a major iron ore crushing plant manufacturer and supplier in China, our stationary iron ore crushing and screening plant works as follows:
Firstly, the primary heavy duty crusher will reduce the run-of-mine iron ore up to 1.3 meters in diameter into lumps about the size of a football feeding by vibrating feeder, it is then transferred to a secondary crusher by heavy duty conveyor belt, where the sized iron ore is broken down into grapefruit-sized lumps. Then the crushed iron ore will be transferred to sieving equipment for grade. The oversize is returned for tertiary crushing after which it becomes part of the feed to the product screens. Secondly, after the crushing process is over, the sized iron ore will be sent to a concentrator where waste shale and low-grade ore is removed so the saleable lump and fines products can be produced. Thirdly, a washing plant is needed to remove the ultrafine iron ore. After the washing process, the final iron ore products are produced. Then it will be transported to a stockpile.

Main iron ores are magnetite, hematite, limonite, iron silicate ore, iron silicate mineral, etc. The most commonly used crushers in iron ore mining industry are jaw crusher, impact crusher, hammer crusher and high-efficient iron ore fine crushers, etc. In iron ore mining, customers usually choose a complete iron ore crushing production line for higher efficiency. At present, the most popular iron ore production line consists of two jaw crushers. After crushing, the material will be sent for the magnetic separation, and then into the ball mill for grinding.
Beneficiation process of Mirror iron ore
Mirror iron ore crusher equipment all the equipment The main products are: Jaw crusher, hammer crusher, roller crusher, vertical impact crusher, cone bearing ball park energy efficient, vibrating screen, automatic anti-sand Spiral pole machine, high efficiency flotation machine, mining stirred tank feeder, concentrator, mine hoist, mine conveyor, pre-water into a ball plate, spiral chute, dressing shaker, washing machines and other equipment. The following flow chart iron ore lens in the device name as follows: the original ore - Crusher - Vibrating Screen - ball mill - grading machine - magnetic separator - dryer. Hematite iron ore mirrors a subspecies. Often is olated sheet-like polymer film collection or roses. Because often containing magnetite particles and a magnetic inclusions.
SBM, mining and construction machinery manufacturer can supply you related mirror iron ore ore crushing equipments such as mirror iron ore ore crusher or mirror iron ore crusher, for example, mirror iron ore jaw crusher, mirror iron ore impact crusher, mirror iron ore cone crusher and so on. Besides, after crushing stage, SBM mirror iron ore ore grinding mill or mirror iron ore mill are used widely in mirror iron ore process in ore mining industry. In recent years, SBM has developed advanced ore crusher-mobile crusher which is applied greatly in ore crushing industry.

mineral crusher and mineral grinding mill used in ore mining

Mineral Crusher

Mineral crusher is also called mine crusher. It is essential crushing machine in mines smelting and processing plants. Mine crusher is also used in old metal recycling.

Features:
  • 1. It crushes the widest variety of scrap metal efficiently and inexpensively, such as iron ore, copper, manganese, chrome, gold, wolfram, Tin, Zinc etc.
  • 2. Effective wear and maintenance prevention. The parts is wearable and the hammer includes chrome.
  • 3. It includes safety unit and the adjustment devices of the discharging open. Solid pieces that cannot be crushed are removed during the crushing process without interruption.
Mines equipment supplier

SBM is a famous company of mineral crusher production devices in China. and supplies all types mine machines such as mine crushers, mine mills for mine ore mining, beneficiation, concentration and extract and purify. We hope our mine ore crusehr can do better for your mine business and wish we cooperate happily.

 

Quartz crusher:

Quartz crusher, or quartzite crusher is a major crushing equipment to break the raw quartzite rock into small particles, fine powder for glass industry and quartz aggregate production plant.
Quartz sand crusher is suitable for crushing materials with particle size more than 3mm. The quartz sand production line mainly includes vibration feeder, quartz crusher (jaw crusher, impact crusher, cone crusher etc.), vibrating screen, belt conveyer and other crusher equipment.

Silica sand crusher:

Silica sand crusher is widely used in silica sand quarry, sand & gravel mining. Silica sand crusher contains jaw crusher (rough crushing, middle crushing, fine crushing), impact crusher, cone crusher, hammer crusher etc. Silica sand crusher is widely used in mining, metallurgical, construction, chemistry, petrochemicals, transportation, energy, building materials industry, Stone crushers feature large crushing rate, high yield, equal product size, simple structure, reliable operation and easy maintenance, economic operating costs etc.
Silica sand, or silicon dioxide is widely used in glass, foundry, ceramics and refractories, smelting ferrosilicon, metallurgy, construction, chemicals, plastics, rubber, abrasives and other industrial. Common Specifications are as follows: 0.5-1.0 mm, 0.6-1.2mm, 1-2mm, 2-4mm, 4-8mm, 8-16mm, 16-32mm.

Marble crusher:

Marble crusher is the major crushing equipment to extraction limestone or to produce marble aggregate. Marble grinder is the widely used marble powder making equipment at present.
Our marble crusher and marble grinder contains jaw crusher, impact crusher, cone crusher, ball mill, trapezium mill, ultrafine mill etc. Marble rock is a kind sedimentary carbonate rock (like limestone, dolomite rock). The white marble is suitable for sculpture, the construction marble is suitable for building stone. The colorless marble rock is a very pure source of calcium carbonate, Finely ground marble or calcium carbonate powder is a component in paper, and in consumer products such as toothpaste, plastics, and paints.

Talc crusher :

Talc crusher and talc grinder is widely used in the talc mine. SBM is a major talc crusher and talc grinder mill manufacturer in China. The whole unit talc powder production line includes jaw crusher, impact crusher, cone crusher, ball mill, trapezium mill, ultrafine mill etc.
Talc, which has a reputation for talc powder, or talcum powder, is used in many industries such as paper making, plastic, paint and coatings, rubber, food, electric cable, pharmaceuticals, cosmetics, ceramics, etc.


Garnet crusher :

Garnet crusher and garnet grinder is the major crushing equipment in garnet mining and processing. The stone crusher can crush the garnet into particles less than 2mm, the garnet grinder mill can make garnet powder less than 200 mesh.
Garnet group includes a group of minerals like pyrope, almandine, spessartine, grossular, uvarovite and andradite. The garnet, as it is mined and collected, is crushed to finer grains; all pieces which are larger than 60 mesh (250 micrometres) are normally used for sand blasting. The pieces between 60 mesh (250 micrometres) and 200 mesh (74 micrometres) are normally used for water jet cutting. The remaining garnet pieces that are finer than 200 mesh (74 micrometres) are used for glass polishing and lapping.Garnet sand is a good abrasive and a common replacement for silica sand in sand blasting. River garnet, river sand garnet, rock garnet is widely distributed in America, China, western India, Australia. Africa, Brazil, Canada, Madagascar, Sri Lanka etc.


Barite crusher :

Barite crusher and barite grinder mill is widely used in barite mining and dressing plant. SBM Machinery can supply the contractors with barite mineral crusher and barite grinder mill to produce barite powder.
Most barite produced is used as a weighting agent in drilling muds. These high density muds are circulated down the drill stem and return to the surface between the drill stem and the wall of the well. Barite is also used as a pigment in paints and as a weighted filler for paper and cloth. It is the primary ore of barium. Barite's high density makes it opaque to x-rays. If it is given to a patient as a drink or enema it can be used to image the shape of internal organs by x-ray.
Sandstone crusher :

Sandstone (sometimes known as arenite) is a sedimentary rock composed mainly of sand-sized minerals or rock grains. Most sandstone is composed of quartz and/or feldspar.
Sandstone crusher is the major crushing machine to break large sandstone less than 2mm. SBM sandstone crusher contains jaw crusher, impact crusher, cone crusher, VSI crusher and so on.

mine car pusher

mine car pusher system

SBM mine car pusher system provides a positive drive for mine cars not only along a horizontal arcuate track section,, but also along an arcuate track section arranged on a downgrade or a moderate upgrade.

  • SBM mine car pusher system on an arcuate track section, comprising drivers guided for longitudinal movement between the rails of the arcuate track section and spaced along the arcuate track section in two groups arranged side-by-side, the drivers of the respective groups being relatively staggered along the arcuate track section, and means for driving the two groups in mutually opposite directions whereby the mine car is engaged by the drivers of the two groups alternately and in succession.
  • SBM mine car pusher system as claimed in Claim 1, in which said groups of drivers comprise driver carriages which are connected to each other and at one end of the arcuate track section are connected to said drive means.
  • 3. SBM mine car pusher system as claimed in Claim 2 wherein the last of the two driver carriages of the two groups of carriages disposed at the end of the arcuate track section remote from the driving means are connected by a tension element extending around a reversing pulley mounted in a stationary position.
  • 4. SBM mine car pusher system as claimed in Claim 3, wherein a tension element passes around a pulley at that end of the arcuate track section adjacent the drive means, said tension element connecting those carriages of the two groups of carriages which are next to the drive.

Mine car pusher is a pusher to push the mine car to move. There are three types of mine car pusher. They are spiral pusher, wire rope pusher and hydraulic pusher. Mine car pusher is widely used in kinds of mine and quarry mining process, such as limestone mining, granite mining, quartz mining, marble mining, coal mining, bauxite mining, feldspar mining, copper mining, etc.

INDUSTRIAL AND RAILROAD CATEGORY:


With roots deep in the San Juan Mining Region of
Colorado and a combined working experience of
over one hundred years, we know the importance
of finding economical solutions to material handling problems.

Melcher Machine Works, the experienced manufacturer
of both surface and underground rail haulage equipment
and materials handling systems. We manufacture every type
of rail equipment for mining, industrial and tourist
railroad usage.

DECORATIVE & COLLECTOR'S CATEGORY


1/3 To Full Size Cars
These Ore Car Replicas exactly follow the original design used in Colorado mines in the late 1800's. The detail is complete even to the foot operated hold down latch and 360 degree operating turn table which allows the car to dump in any direction. Wheels are reproductions of an exclusive curved five spoke cast iron design.  The main feature of the "scoop" type ore car was its "tilt" to allow loading by scooping into it-rather than shovel the "load" over the sides.  These replicas tilt and operate just like the originals allowing for a variety of attractive displays.

Today, original mining cars are nearly impossible to find and can sell for thousands of dollars. These high caliber mining car replicas are built to the original design standards by Melcher Machine Works of Durango, Colorado. These sturdy built pieces of rail equipment lend themselves to many opportunities in the realm of antique collecting, mining equipment and memorabilia, landscaping, home decorating, garden railroading and commercial retail display.

Contact Site: http://www.rockscrusher.com

Mine Car Theory and Mine Car used in Ore Mining

Mine Car Size

The size of mine cars may be determined by the physical conditions of the mine. Low-coal seams demand low height cars. Poor roof requiring timbering close to the track will often limit the width of the cars. The radius of the smallest curve will limit the length of the car. In low-coal mines, large capacity is obtained by increasing the length and width to counteract the low height. Also by using special designs, which permit low car bottoms. By the use of side and end boards, the miner can remove these boards to shovel coal from the end or side without interference. After which the boards are raised and a topping is placed on the cars. In mines where the physical conditions do not limit the car size, this is usually determined by the cars use. Anthracite mines employing loading chutes from breasts use high, large capacity cars. Mechanical loading demands the largest possible car consistent with haulage and loading conditions so as to reduce the number of car changes and time delay. When the car must be designed for the colliery, shaft size may limit the car length and width. When a new mine is opened, the car size is often chosen arbitrarily, subject to physical conditions as far as can be determined. The haulage curves, dumping devices, etc. are designed to accommodate the new mine car.

Wood or Steel

Mine car bodies may be built of Wood or steel, or may be a combination of both. Wooden cars are readily constructed, often being assembled in the shop by unskilled labor. In addition they have a certain flexibility, which gives them excellent riding qualities, and they are inexpensive to construct. All steel cars cost from 50 to 100 percent more to build than wooden cars but their longer life quite often offsets this initial disadvantage. Maintenance costs are estimated at one fourth of wooden cars. Also, for the same outside dimensions the steel car gives 10 to 20 percent more inside capacity. Steel cars have greater durability and can withstand shock that would crush wooden cars. When skilled labor is available, a bent steel car can be repaired and placed into service at a very low cost. Lower maintenance costs and greater capacity should reduce the cost of haulage when steel cars are used.

Wheels and Bearings

Wheel material may be either cast iron or cast steel. Cast iron wheels have a hard flange and tread that discourages turning on a lathe, so the wheels are used until a groove is worn in the tread and then discarded. Wheels of cast steel do not break as easy as cast iron and are one-third lighter in weight but wear more readily. They can be machined when they become grooved and this increases their service life. Manganese steel wheels are hard and tough and will out wear many other types. They cannot be turned on a lathe however, and do not have the scrap value of cast iron or cast steel. Wheel size has a bearing on car height. In low-coal mines, small diameter wheels are necessary. In high coal mines, the common diameter is 14 to 18 inches. Large wheels have considerably less friction on the track than smaller wheels and are preferable. Less friction means less wear for the same distance traveled and this means a longer life for the larger diameter wheel. On the other hand, the larger wheel adds more weight to the car, and gives additional height to the car without giving it additional capacity. Wheels may be termed “loose” or “tight” according to whether they turn freely on the axle or whether the axle turns with the wheel. The latter is railroad practice and demands the track be elevated on the curves to permit the outside wheel to travel around the curve without skidding. Where loose wheels are used, the axle is usually fixed in place on the car bottom. In the case of tight wheels, the axle rotates in bearings placed on the car bottom. Bearings may be of the plain or anti frictional type. In the plain bearing type, the wheel hub fits over the axle with only sufficient clearance to permit the use of a lubricant. Friction in a bearing of this type is sliding friction. Brass is usually used as a bearing to diminish wear to the axle. When the bearing would become worn or sloppy, the brass would be changed. With roller bearings, which are practically the only antifriction type used on mine cars, rollers are supported in a frame in such a manner that the shaft of the axle rotates inside of the bearing and the wheel hub rotates with the bearing. This type of bearing employs a rolling friction, which is up to 50 percent less than that of the plain bearing. Plain bearings are lubricated with heavy oil while roller bearings are lubricated with grease. The latter requires greasing every three and one half months compared to 24 days for the plain bearings. However roller bearings must be kept clean of dust. Dirt is easily attracted to the grease, which fills and damages the rollers and reduce their efficiency.

Body Designs

The end gate style of body design consists of a car with a gate hinged on a bar at one end of the car and with means of securing it in place. This type of car requires end tilting to be dumped and may be built either of wood or steel and is the most common in the anthracite field. The gate end is not as strong as the tight end and the sides will tend to spread open after time permitting spillage of fine coal onto the roadbed when the car is in motion. The coal might become crushed under the car wheels and increase wheel friction as well as contribute to the coal-dust hazard. Tight end cars have no gate but are tight on both ends, requiring a rotating car dump, which will turn the car upside down to remove the coal. Their construction is more substantial than the gate end car of the same size and material. They do not “leak” fine coal to any extent unless car maintenance is poor and allows cracks to appear in the bottom and sides of the car. They are likewise constructed either of wood or steel.

SBM is a professtinal mine car manufacturer and suppliers in China. We supply mine car,and we also can design mine car for your business. Buy mine car from SBM!

Contact Site:  http://www.rockscrusher.com

Mica Crusher and mica grinding mill,mica mining used in quarry crusher

Mica is a kind of rock-forming minerals, usually six or diamond was fake plates, sheets, columnar crystal. Color changes with different chemical composition, mainly with the increase of Fe content and becomes deeper. Mica is characterized by the insulation, high temperature resistant, shiny, physical and chemical properties of stability, good insulation, elasticity and toughness. Most used in industry is muscovite, followed by phlogopite. They are widely used in building material industry, the fire industry, and fire extinguishing agents, welding, plastics, electrical insulation, paper, bitumen paper, rubber, pearlescent pigments and other chemical industries.

Mica Crusher

Mica is invaluable in the electrical industry because of its unique combination of physical, chemical and thermal properties, low power loss factor, dielectric constant and dielectric strength. Dieletric strength is the ability to withstand high voltage without puncturing. Mica is invaluable in the electrical industry because of its unique combination of physical, chemical and thermal properties, low power loss factor, dielectric constant and dielectric strength.

The Mica World Resources

India is the leading producer of muscovite mica followed by Brazil. Other producing countries are the USA, Tanzania, Rhodesia and Argentina. The USA generally produces scrap mica. The leading producers of phlogopite mica are Malagasy Republic and Tanzania whose average annual productions are 1,000 tonnes and 300 tonnes respectively. Small production of phologopite is reported from Canada, Tanzania and India.

The Mica Industrial Applications

Sheet mica is used in a number of electrical and electronic appliances in different shapes and sizes. As an insulating material it is used in equipment like condensers, transformers, sheostats, radio and electronic tubes and radar circuits. It is used in the form of washers, discs, tubes and plates.
Nowadays mica is finding increasing use in equipment that encounters very high temperatures like rockets, missiles and jet engine ignition system. Phlogopite is used in spark plugs. Sheet mica, however, is not always available in required size as demanded by the industry.
Great progress has been achieved in making built-up mica called micanite. Mica films are placed with alternate layers of binding materials like shellac, alkyl, or silicon resin and then pressed and baked. Micanite is in common use now. It is convenient to cut or punch micanite according to requirements.
In the electronic-field, natural mica is mainly used in the manufacture of capacitors such as bridge-spacers in electronic valves and as panel-board where heat-resistance and low-loss peoperties at high frequencies are required. In such delicate equipment, mica of thinness varying from 0.015 inch and below are used. The mica of thickness in the range of 0.007" to 0.015" is used in bridge-spacers. Even thinner films, between 0.004" to 0.006", are used as backing plates for capacitors and further thinner films in the range of 0.0007" to 0.002" as dielectric. The splittings of such fine thickness are made with the help of pin and knife only. So you can find it the mica needs to be crushed.
Waste or scrap mica is used invariably in the form of ground mica. The uses of ground mica depend largely upon its appearance and lubricating properties. Both of these characteristics are affected by the methods of grinding as well as teh purity and nature of the scrap.
Before you use the mica, you need to crush or mill it. SBM supply the mica crusher and mica grinding mill: mica jaw crusher, mica impact crusher, mica cone crusher, vsi mica crusher, mobile mica crusher, trapezium mica grinding mill, mica ultrafine grinding mill, mica ball mill grinder etc.

mica crusher 

The Mica World Resources


India is the leading producer of muscovite mica followed by Brazil. Other producing countries are the USA, Tanzania, Rhodesia and Argentina. The USA generally produces scrap mica. The leading producers of phlogopite mica are Malagasy Republic and Tanzania whose average annual productions are 1,000 tonnes and 300 tonnes respectively. Small production of phologopite is reported from Canada, Tanzania and India.
The Mica Industrial Applications
Sheet mica is used in a number of electrical and electronic appliances in different shapes and sizes. As an insulating material it is used in equipment like condensers, transformers, sheostats, radio and electronic tubes and radar circuits. It is used in the form of washers, discs, tubes and plates.
Nowadays mica is finding increasing use in equipment that encounters very high temperatures like rockets, missiles and jet engine ignition system. Phlogopite is used in spark plugs. Sheet mica, however, is not always available in required size as demanded by the industry.
Great progress has been achieved in making built-up mica called micanite. Mica films are placed with alternate layers of binding materials like shellac, alkyl, or silicon resin and then pressed and baked. Micanite is in common use now. It is convenient to cut or punch micanite according to requirements.
In the electronic-field, natural mica is mainly used in the manufacture of capacitors such as bridge-spacers in electronic valves and as panel-board where heat-resistance and low-loss peoperties at high frequencies are required. In such delicate equipment, mica of thinness varying from 0.015 inch and below are used. The mica of thickness in the range of 0.007" to 0.015" is used in bridge-spacers. Even thinner films, between 0.004" to 0.006", are used as backing plates for capacitors and further thinner films in the range of 0.0007" to 0.002" as dielectric. The splittings of such fine thickness are made with the help of pin and knife only. So you can find it the mica needs to be crushed.
Waste or scrap mica is used invariably in the form of ground mica. The uses of ground mica depend largely upon its appearance and lubricating properties. Both of these characteristics are affected by the methods of grinding as well as teh purity and nature of the scrap.
Before you use the mica, you need to crush or mill it. SBM supply the mica crusher and mica grinding mill: mica jaw crusher, mica impact crusher, mica cone crusher, vsi mica crusher, mobile mica crusher, trapezium mica grinding mill, mica ultrafine grinding mill, mica ball mill grinder etc.

2010年10月22日星期五

Basalt Crusher

Basalt quarry is a common extrusive volcanic rock. It is usually grey to black and fine-grained due to rapid cooling of lava at the surface of a planet. this may be porphyritic containing larger crystals in a fine matrix, or vesicular, or frothy scoria. Unweathered basalt colour is black or grey.
In basalt quarry, what we usually used in basalt mining are basalt crusher. Usually basalt is used as buiding materials for road, railway, runway, so we must crush basalt into such size of basalt particle.
basalt crusher is the most important crushing equipment in basalt mining quarry.
The design of a stone crushing production line is usually decided by several factors:
1) raw materials to be crushed
2) The hardness, percentage of Si, moisture percentage of the raw materials
3) The average size of the raw materials before entering into the crushing system
4Requested product sizes, percentage of the sizes, and their usage
5) hour capacity of the crushing line

basalt crusher manufactured by SBM can meet different clients in mining and quarrying industry. As a major Basalt crushing equipment manufacturer, SBM has developed metal Basalt equipment, nonmetal Basalt equipment and other quarry crushing equipment.


In the highway asphalt concrete road surface, both SMA and Super pave technology need high requirement of the shape and rank of aggregate. Especially to the content of needle plate type in the basalt, the former impact crusher processing chart cannot meet the requirement any longer. Therefore, our company puts up the newest crushing and screening processing chart-VI series of Vertical Shaft Impact Crusher to meet the need. The high-quality aggregate produced by this production line is widely used in road surface of many highways.

Basalt Crusher

Basalt quarry is a common extrusive volcanic rock. It is usually grey to black and fine-grained due to rapid cooling of lava at the surface of a planet. this may be porphyritic containing larger crystals in a fine matrix, or vesicular, or frothy scoria. Unweathered basalt colour is black or grey.
In basalt quarry, what we usually used in basalt mining are basalt crusher. Usually basalt is used as buiding materials for road, railway, runway, so we must crush basalt into such size of basalt particle.
basalt crusher is the most important crushing equipment in basalt mining quarry.
The design of a stone crushing production line is usually decided by several factors:
1) raw materials to be crushed
2) The hardness, percentage of Si, moisture percentage of the raw materials
3) The average size of the raw materials before entering into the crushing system
4Requested product sizes, percentage of the sizes, and their usage
5) hour capacity of the crushing line

basalt crusher manufactured by SBM can meet different clients in mining and quarrying industry. As a major Basalt crushing equipment manufacturer, SBM has developed metal Basalt equipment, nonmetal Basalt equipment and other quarry crushing equipment.


In the highway asphalt concrete road surface, both SMA and Super pave technology need high requirement of the shape and rank of aggregate. Especially to the content of needle plate type in the basalt, the former impact crusher processing chart cannot meet the requirement any longer. Therefore, our company puts up the newest crushing and screening processing chart-VI series of Vertical Shaft Impact Crusher to meet the need. The high-quality aggregate produced by this production line is widely used in road surface of many highways.

2010年10月8日星期五

JC jaw Crusher

Jaw Crusher is one of main equipment of stone crushing, is ideally suitable for crushing all kinds of ores and crushing the big size materials, the highest anti-pressure strength of crushed material is 320 Mpa,having two types: primary crushing and secondary crushing.jaw crusher has been sold to 75 countries, the price and quality of jaw crusher is widely recognized, we always stick to be your satisfying partner.
The Crushing form of this series Jaw Crusher is driven-squeezing style. Its working principle is: Motor drives belt and belt pulley, makes moving jaw up and down through eccentric shaft. When the moving jaw is up, the angle between lining plate and moving jaw becomes large, and this will push moving jaw plate close to the fixed jaw plate.
During this process, the material is crushed and ground, thus the crushing will be done. When the moving jaw is down, the angle between lining plate and moving jaw becomes small, the moving jaw plate will leave the fixed jaw plate on account of the effect of pulling bar and spring, and then the crushed material will be discharged from the lower opening of the crushing room. With the motor continuously rotating and the material periodically crushed and discharged by the crusher, the mass production can be realized.
jaw crusher

2010年9月5日星期日

The technical of symons cone crusher

1. High performance

With the better cavity design and combination of the reasonable speed and stroke ,the cone crusher can make more power under the same flexible cone .Therefore ,this kind of cone crusher have higher performance and production capability compared with the similar cone crusher  .

2.Better particle components

With the principle of layer crushing, the final products features high cubic shape ratio, low ratio of needle shape stone, and more even particle size.

3.High stability

When some non-crushing materials like the iron enter the machine ,the iron-pass protection equipment will automatically release them and then return the original position .And the iron-pass protection equipment have the fixed discharge opening returning point so that it can return to the original discharge opening after the non-iron materials pass the crushing cavity .

4. Convenient cavity cleaning

If the crusher stops the working function under the overloading condition, the hydraulic cavity cleansing system will quickly clean the crushing cavity, which will greatly reduce the off-time.

5. High reliability

We adopt large ram spindles, heavy main machine frame and independent light oil automatic control lubrication system, which ensure the robust equipment structure and reliable function.

6.Convenient maintenance and operation

All of the spare parts can be torn apart from the top and side board and so did the fixed and flexible cone .And the bronze slide bearing can maintain the quality bearing capability under the condition of high impact shaking crushing condition and also features more economic and convenient maintenance than the rolling bear.

7、low production cost

With the high production capability reliability, and convenient maintenance, it greatly reduce the production cost.

8、wide application

CS series Symons cone crusher  can make its full advantages to apply various crushing crafts from the super course to the fine crushing, from the fixed crushing to the mobile crushing.
CS series Symons cone crusher have a wide crushing cavity choice from super course crushing to the fine crushing, which means we can choose the crushing cavity by the crushing crafts.

9、We adopt the segregate and multi-point control independent light-oil lubrication system to ensure the double-protection of its bearing ,thus realizing the automatic protection of the whole machine .

2010年9月4日星期六

CS Series spring cone crusher

Comparing with other kinds crusher, CS Series spring cone crusher  with high-efficiency (Symons cone crusher ) have excellences for fine crushing, high productions and low maintenance. The long force arm designed into the Symons cone provides greater crushing force.
  And the spring release system generates more opposing force than other cone crushers. So use in mine industry widely.

According to customer's requirement, our company designs high-performance crusher, CS Series High-efficiency Spring Cone Crusher(Sysmons Cone Crusher).
This crusher concentrates on the speciality of high-frequency, optimization of cavity-type, reasonable stroke and bases on the advanced technology introduced abroad, follows the conception of laminated crushing principle, more crushing and less grinding.
PY Series Spring Cone Crusher is suitable to crush various kinds of ores and rocks of medium or above medium hardness. Compared with Jaw Crusher, PY Series Spring Cone Crusher is of stable structure, high efficiency, easy adjustment, and economical using etc. The spring safety system of crusher acts as an overloading protection system that allows metals to pass through the crushing chamber so as not to damage the Cone Crusher. The safety system uses dry oil and water as two kinds of sealed formation to make plaster powder and engine oil separated to make sure reliable performance. This type of crushing chamber depends upon the size of feeding and fineness of the crushed product. The standard type (PYB) is applied to medium crushing, the medium type is applied to medium or fine crushing and the short head type is applied to fine crushing.

PY Series Spring Cone Crusher  materials by the working surface between the movable cone and fixed cone. So it is more advanced and efficiency than Jaw Crusher. The movable cone is supported by spherical bearing and fixed on an hanging erect shaft which is set in the eccentric sleeve, and the sleeve is set on the stopping and pushing bearing. The movable cone and erect shaft are driven by the eccentric shaft sleeve together. The eccentric shaft sleeve is driven by horizontal shaft and fimbriated gear, and the wheel of the conveyor belt is driven by motor through v-belts. The lower part of vertical shaft is installed in the eccentric sleeve. When the eccentric sleeve rotates, there is a conical surface lined out by the shaft. When the movable cone comes near the fixed cone, rocks are grinded into pieces, when the cone leaves, grinded materials is discharged from the discharge hole. The fixed cone can be ascended or descended by adjusting setting to adjust the width of discharge hole, consequently the output size is determined.

2010年9月3日星期五

symons cone crusher and spring cone crusher

The spring cone crusher is the most widely crushing machinery in the world . With the optimized improvement , the spring cone crusher features more reasonable and advanced ,which have appeared the excellent performance in the manufacturing ,installation, and maintenance and so on. And with the simple operation, safety, and high-efficiency, the spring cone crusher we company produced have been specially used in the mining and crushing working. And we look forward to your consultation !

symons cone crusher

Technical features of Spring cone crusher

The spring cone crusher have the large crushing force and can provide larger production capability.

Two kinds of crushing cavity structure can adapat to the wide application of requirements of the particle size .

The spring secure system can provide the secure and efficient over-loaded protection

The spring cone crusher have the perfect lubrication system.

Application of the Spring cone crusher

The spring cone crusher can widely be applied to crush the hard and mid-hard ores and rocks in the field of metallurgy , building, road , chemicals ,and construction industrials and so on. And spring cone crusher can also be used to crush the Iron ore, limestone, quartz, granite, cement guessed, and so on.

Working principle of Spring cone crusher

The main structure of spring cone crusher is including the frame, transmitting, hollow eccentric shaft, bowl bear, crushing cone, set adjustment , adjustment housing ,spring and hydraulic drill used to adjust the discharge opening ,etc. .During the operation of spring cone crusher , the motor drives the eccentric shaft shell to turn around through a horizontal axle and a pair of bevel gear. The axle of crushing cone swings with the force of eccentric shaft shell so that the surface of the crushing wall is closely to the roll mortar wall from time to time. In this way, the ores and rocks will be pressed and crooked and finally crushed.

2010年8月30日星期一

ball milling machine how to use

A ball mill is used to grind solid materials into powders. It's commonly used to make paints and ceramics. It rotates on a horizontal axis and uses iron or stainless steel balls to crush materials into powder. With a container and a power drill, you can quickly make your own ball mill.

first,Installation Ball Mill
      The quality of ball mill installation quality, the ability of mill is the key to normal work. Various types of ball mill installation method and sequence similar. To ensure the smooth functioning of ball mill and reducing the harm to the buildings, it must be installed in its weight of 2.5 to 3 times the reinforced concrete foundation.

      Installation ball mill, the first should be installed main bearing. In order to avoid aggravating the problem of the hollow crankshaft bearings lining and shoulder wear, the two main bearing the base plate of elevation difference in the length of each meter should not more than 0.25 mm. Secondly, the installation of the ball mill cylinder of the light of the specific conditions, can be pre-assembled the entire English Department loaded directly, but also can be divided into several parts of the installation, adjustment and should check with the centerline Journal and the ball mill, the error must ensure that its Concentric within per meter in length should be less than 0.25 mm. The final installation of the transmission components (small gear, uranium, coupling, reducer, motor, etc.) During installation, product technical standards should be measured and adjusted. Gear check the radial pendulum poor and small gear meshing performance; gear reducer and small concentric degrees, and the motor and reducer concentric degrees. When fully installed are in line with requests, we can not go on the basis of bolt main bearing floor and the last watering.

Second, Operation and maintenance of ball mill

    If the ball machine running high rate of grinding effect, and to strictly abide by the operation and maintenance of order. Starting in the ball mill, should check whether the tightening bolt connections; gears, coupling, etc., as well as the keys to the first mine-spoon Solid tight situation.

    Check the oil tank reducer and the adequacy of the lubricating device and instrumentation whether illnesses, pipes unimpeded. Check ball mill with classifier equipment availability impede functioning of the surrounding debris, and then use the cable car to the ball mill-week, the ball loose tube Dutch and ores, and to inspect the ring gear and pinion meshing, there abnormal sounds. The start order is first activated ball mill lubricants pump, when the hydraulic reach 1.5 to 2.0 kg / cm 2 o'clock, the ball mill will be allowed start again start classifier. Everything is running normally, and so on, can begin to draw mine. In operation process, should always pay attention to bearing temperature should not exceed 50 ~ 65 ° C. The attention to the regular motor, voltage, current, temperature, audio, and so on. Attention lubrication system at any time, the oil tank should not exceed 35 ~ 40 ° c, to tubing pressure should be maintained at 1.5 to 2.0 kg / cm 2. Check size gear, the main bearings, such as grading machine transmission components reducer lubrication, and attention to the observation before and after the ball mill Cover, Simplified and exclusive ore bins overflow tank and machine classification back to the trough of sand plug the leak and sand. Regular attention to the changing nature of ore, according to the situation promptly and take appropriate measures.

     Stop ball mill, the first stop to the mining machine, within the ore processing to be simplified after the end of ball mill motor to stop, the last stop pumps. With the upgrade installations classifier to the spiral of sand, and then stop classifier.

2010年8月29日星期日

portable crusher

portable crusher plant is a new rock crushing equipment, which greatly expanded the concept of rough broken areas of operation. Portable crusher is designed to stand in the position of our customers, to eliminate fragmentation site, the environment breaking work of the barriers .

YG Coarse broken portable crusher plant is a new rock crushing equipment, which greatly expanded the concept of rough broken areas of operation. It is designed to stand in the position of our customers, to eliminate fragmentation site, the environment breaking work of the barriers to customers as a primary solution and provides customers with a cost-effective projects operating hardware.

YG938E69 type mobile crusher station's high performance: PE series high performance crusher, crushing machine with integrated feeder and vibrating screen, belt conveyor under screen, vibrating screen, crusher integrated vehicle installation, steering traction axis, to facilitate road transport and venues in-depth, vehicle installation support, equipment to facilitate site stationed fast, car motors and control box integration YG938E69 type portable crusher station purposes and advantages

Kaolin Crusher and kaolin stone Mill

Rocks that are rich in kaolinite are known as kaolin, which is a fine, pure-white clay (hydrated aluminum silicate). Some of kaolin is hard rock, some is soft clay. Kaolin rock must be crushed and fine grinded to get kaolinite. SBM can supply kaolin crusher and kaolin Grinding mill  for you.

Kaolinite is one of the most common minerals. Kaolinite is used in ceramics, medicine, coated paper, as a food additive, in toothpaste, as a light diffusing material in white incandescent light bulbs, and in cosmetics. It is generally the main component in porcelain.

Rocks that are rich in kaolinite are known as kaolin, which is a fine, pure-white clay (hydrated aluminum silicate). Some of kaolin is hard rock, some is soft clay.

Hard kaolin rock must be crushed and fine grinded to get kaolinite. The crushing process can be constructed by Jaw crusher, vibrating feeder, vibrating screen, and belt conveyor. Of coarse, Jaw crusher  can be replaced by Cone crusher  or Impact crusher , which depends on requirement to the size, shape of the stones and design plan of kaolin production line. The grinding process includes ball mill, hopper, classifier, elevator and so on. Ball mill can be replaced by ultrafine mill, coarse powder mill, raymond mill or MTW trapezium mill.

Soft clay must be dryed before grinding. The grinding process is the same as hard kaolin rock grinding process.